Linux version

User avatar
support
Site Admin
Posts:1663
Joined:Thu May 07, 2015 1:33 pm
Re: Linux version

Post by support » Wed May 03, 2017 1:43 pm

Blendie wrote:the program: 'cannot load cursor
Try to run it again several times.
User avatar
Blendie
Posts:88
Joined:Thu Dec 08, 2016 11:10 pm
Location:UK

Re: Linux version

Post by Blendie » Wed May 03, 2017 4:34 pm

support wrote:
Blendie wrote:the program: 'cannot load cursor
Try to run it again several times.
Thanks; will try that. :)
AMD, SparkyOS/Mate, XP-Pen Deco v2
Fish
Posts:2
Joined:Sun Apr 23, 2017 9:21 pm

Re: Linux version

Post by Fish » Fri May 05, 2017 3:49 pm

Thanks for your work! Tried it out. My laptop isn't very powerful and has an integrated graphics card, so I'm not expecting this to run that smoothly, but a few things I noticed:

- I also got the "cannot load cursor" popup, and it appeared many times before I managed to open Paintstorm.
- Probably related to that error, when the cursor is above the UI it appears as a white box. (See pic)
- Pen pressure seems to be not working. I tried changing the global pressure curve, restarted, etc, but it still didn't work.
- Rotation with pen tilt seems to be not working, with a few flat brushes at least. (I checked the box under brush settings for "tilt" instead of "direction"... is there anything else I should be doing?)

System info:
- Asus Zenbook UX305-FA (8GB RAM)
- Ubuntu 16.04 LTS, 64bit
- Intel Core M-5710c
- Intel HD Graphics 5300

Tablet(s) info:
- Wacom Cintiq 13HD, with necessary drivers
- Wacom Bamboo Pen + Touch

My tablets (pen pressure etc) work fine with Krita, so it's probably not a driver issue.
Attachments
psscursor1a.png
psscursor1a.png (156.6KiB)Viewed 9326 times
psspopup1.png
psspopup1.png (351.54KiB)Viewed 9326 times
User avatar
support
Site Admin
Posts:1663
Joined:Thu May 07, 2015 1:33 pm

Re: Linux version

Post by support » Tue May 09, 2017 3:42 pm

Hi, all. Please test the Linux version 2.0
http://paintstormstudio.com/Paintstorm_ ... run.tar.gz
User avatar
Blendie
Posts:88
Joined:Thu Dec 08, 2016 11:10 pm
Location:UK

Re: Linux version

Post by Blendie » Tue May 09, 2017 11:25 pm

Thanks so much for doing this. :) I was able to get it to run this time, and it was great except for no pressure sensitivity (worked in mypaint and krita 3.1.3/4).
Last edited by Blendie on Sat Jun 03, 2017 4:07 am, edited 2 times in total.
AMD, SparkyOS/Mate, XP-Pen Deco v2
User avatar
Ico-dY
Posts:31
Joined:Fri Sep 09, 2016 2:46 pm
Contact:

Re: Linux version

Post by Ico-dY » Wed May 10, 2017 12:40 pm

support wrote:Hi, all. Please test the Linux version 2.0
http://paintstormstudio.com/Paintstorm_ ... run.tar.gz
Finally, the latest version for Linux! :D
I'll try it as soon as possible! :mrgreen:
User avatar
support
Site Admin
Posts:1663
Joined:Thu May 07, 2015 1:33 pm

Re: Linux version

Post by support » Wed May 10, 2017 1:23 pm

Blendie wrote:Thanks so much for doing this. :) I was able to get it to run this time, and it was great. The only issue I had was no pressure sensitivity in PSS (worked in mypaint and krita 3.1.3).
what is your tablet model?
User avatar
Blendie
Posts:88
Joined:Thu Dec 08, 2016 11:10 pm
Location:UK

Re: Linux version

Post by Blendie » Wed May 10, 2017 4:16 pm

support wrote:
Blendie wrote:Thanks so much for doing this. :) I was able to get it to run this time, and it was great. The only issue I had was no pressure sensitivity in PSS (worked in mypaint and krita 3.1.3).
what is your tablet model?
Hi, setup is:

linuxmint-18.1-cinnamon-64bit [kernel 4.4.053 generic]
ugee [2150] (mirroring monitors, so pen nib centred)
haswell intel i7- 4790 @3.60ghz, 16 gig ram, amd radeon r9 255

Clicking the 'upload system info' in Linux brings this information.
Graphics: Card: Advanced Micro Devices [AMD/ATI] Cape Verde PRX [Radeon R9 255 OEM]
bus-ID: 01:00.0 chip-ID: 1002:6835
Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1920x1080@60.00hz, 1920x1080@60.00hz
GLX Renderer: Gallium 0.4 on AMD CAPE VERDE (DRM 2.43.0, LLVM 3.8.0)
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes

ugee's driver information, that used to run with pressure sensitivity on windows [am now fully on Linux]:
driver v8.1.2016.429
cp v8.1.2016.414
wintab32 v8.1.2016.706
http://ugee.net/download/index/p/2.html [the driver at the bottom of the list]
Last edited by Blendie on Sat Jun 03, 2017 4:03 am, edited 8 times in total.
AMD, SparkyOS/Mate, XP-Pen Deco v2
User avatar
Ico-dY
Posts:31
Joined:Fri Sep 09, 2016 2:46 pm
Contact:

Re: Linux version

Post by Ico-dY » Thu May 11, 2017 9:49 pm

After a while pen pressure doesn't work anymore... :(
Although it's fine with Krita, Mypaint, Gimp, AzPainter...

Distribution: Xubuntu 16.04 LTS
Kernel: Linux 4.8.0-generic (x86_64)
Desktop Environment: XFCE 4
CPU: i7-4790K
Memory: 32GB
GPU: GeForce GTX 760 4GB
NVIDIA Driver Version: 378.13
Tablet: Wacom Intuos 5 (Pro) PTK-650
User avatar
support
Site Admin
Posts:1663
Joined:Thu May 07, 2015 1:33 pm

Re: Linux version

Post by support » Fri May 12, 2017 10:16 am

[quote="Ico-dY"]After a while pen pressure doesn't work anymore... :(
Although it's fine with Krita, Mypaint, Gimp, AzPainter...

But the previous version works with pressure?
Post Reply