Rope and spring problem

Axl
Posts: 8
Joined: Sun Jan 15, 2017 4:30 pm

Rope and spring problem

Postby Axl » Thu Aug 03, 2017 2:05 pm

Hi, I have a problem with the rope and spring.
When I'm drawing the line with higher speed the brush keeps jumping all over the place:
https://www.useloom.com/share/e3bc488ea511411c90915f4e35bce844
Does anyone has the same problem?
Also, is there a way to adjust the rope length?
Thanks.
User avatar
support
Site Admin
Posts: 980
Joined: Thu May 07, 2015 1:33 pm

Re: Rope and spring problem

Postby support » Sun Aug 13, 2017 8:56 am

I see a speed controller enabled on your stabilizer slider. it's mean that stabilizer works as 0 at the fast moving and the stroke jump to the cursor with 0 stabilizer - there's no delay. Disable it.
Axl
Posts: 8
Joined: Sun Jan 15, 2017 4:30 pm

Re: Rope and spring problem

Postby Axl » Sun Aug 13, 2017 11:46 am

Thanks, that was indeed the problem. Can you tell me please if it's possible to adjust the rope's length?

Return to “Issues”

Who is online

Users browsing this forum: No registered users and 1 guest

cron