Page 1 of 1

PainterPaintAndBlur

Posted: Thu Mar 31, 2016 9:33 pm
by JoseConseco
Square hard:
https://dl.dropboxusercontent.com/u/268 ... pstbrushes
Image

Good for blocking big chunks of value. With very light stroke (middle image), you can see some texture and underlaying image is not destroyed/blured. With medium pressure you will blur your underlaying image and apply some paint (right). With hard pressure you basically paint with full opacity.

To make this brush edges hard, when using big brush size, I had to set spacing to low fixed value so that you get nice sharp edges. That is why be warned: when using small brush size, you may see ugly stepping effect. Basically this problem is related to my post here:
http://paintstormstudio.com/forum/viewt ... f=5&t=2824

Re: EXAMPLE

Posted: Thu Mar 31, 2016 9:45 pm
by JoseConseco
PainterPaintAndBlur:
Gives painterly look. Good for color blending and applying color.
Image
https://dl.dropboxusercontent.com/u/268 ... pstbrushes

Again spacing is set to fixed value, so with lower brush size you may see too big brush spacing. But there is no other way to get sharp edges with bigger brush size...

Re: EXAMPLE

Posted: Fri Apr 01, 2016 8:11 am
by vezinho
Thanks a lot Jose for sharing your brushes !!
I am going to give a try on these !!
Cheers!!