-
JoseConseco
- Posts:100
- Joined:Sat May 30, 2015 9:15 pm
PainterPaintAndBlur
Post
by JoseConseco » Thu Mar 31, 2016 9:33 pm
Square hard:
https://dl.dropboxusercontent.com/u/268 ... pstbrushes
Good for blocking big chunks of value. With very light stroke (middle image), you can see some texture and underlaying image is not destroyed/blured. With medium pressure you will blur your underlaying image and apply some paint (right). With hard pressure you basically paint with full opacity.
To make this brush edges hard, when using big brush size, I had to set spacing to low fixed value so that you get nice sharp edges. That is why be warned: when using small brush size, you may see ugly stepping effect. Basically this problem is related to my post here:
http://paintstormstudio.com/forum/viewt ... f=5&t=2824
Last edited by
JoseConseco on Fri Apr 07, 2017 7:03 pm, edited 2 times in total.
-
JoseConseco
- Posts:100
- Joined:Sat May 30, 2015 9:15 pm
Post
by JoseConseco » Thu Mar 31, 2016 9:45 pm
PainterPaintAndBlur:
Gives painterly look. Good for color blending and applying color.
https://dl.dropboxusercontent.com/u/268 ... pstbrushes
Again spacing is set to fixed value, so with lower brush size you may see too big brush spacing. But there is no other way to get sharp edges with bigger brush size...
Last edited by
JoseConseco on Fri Apr 07, 2017 7:03 pm, edited 2 times in total.
-
vezinho
- Posts:42
- Joined:Fri Mar 04, 2016 7:51 am
Post
by vezinho » Fri Apr 01, 2016 8:11 am
Thanks a lot Jose for sharing your brushes !!
I am going to give a try on these !!
Cheers!!
